Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

pragma solidity ^0.8.11;

import "@openzeppelin/contracts/access/Ownable.sol";
import "./base/Errors.sol";
import "./interfaces/IAlchemistV2.sol";
import "./interfaces/external/IWETH9.sol";
import "./interfaces/IWETHGateway.sol";
import "./interfaces/IWhitelist.sol";

/// @title  WETHGateway
/// @author Alchemix Finance
contract WETHGateway is IWETHGateway, Ownable {
    /// @notice The version.
    string public constant version = "2.1.0";

    /// @notice The wrapped ethereum contract.
    IWETH9 public immutable WETH;

    /// @notice The address of the whitelist contract.
    address public whitelist;

    constructor(address weth, address _whitelist) {
        WETH = IWETH9(weth);
        whitelist = _whitelist;
    }

    /// @dev Allows for payments from the WETH contract.
    receive() external payable {
        if (IWETH9(msg.sender) != WETH) {
            revert Unauthorized();
        }
    }

    /// @inheritdoc IWETHGateway
    function refreshAllowance(address alchemist) external onlyOwner {
        WETH.approve(alchemist, type(uint256).max);
    }

    /// @inheritdoc IWETHGateway
    function depositUnderlying(
        address alchemist,
        address yieldToken,
        uint256 amount,
        address recipient,
        uint256 minimumAmountOut
    ) external payable {
        _onlyWhitelisted();
        if (amount != msg.value) {
            revert IllegalArgument();
        }
        WETH.deposit{value: msg.value}();
        IAlchemistV2(alchemist).depositUnderlying(yieldToken, amount, recipient, minimumAmountOut);
    }

    /// @inheritdoc IWETHGateway
    function withdrawUnderlying(
        address alchemist,
        address yieldToken,
        uint256 shares,
        address recipient,
        uint256 minimumAmountOut
    ) external {
        _onlyWhitelisted();
        // Ensure that the underlying of the target yield token is in fact WETH
        IAlchemistV2.YieldTokenParams memory params = IAlchemistV2(alchemist).getYieldTokenParameters(yieldToken);
        if (params.underlyingToken != address(WETH)) {
            revert IllegalArgument();
        }

        IAlchemistV2(alchemist).withdrawUnderlyingFrom(msg.sender, yieldToken, shares, address(this), minimumAmountOut);

        uint256 amount = WETH.balanceOf(address(this));
        WETH.withdraw(amount);

        (bool success, ) = recipient.call{value: amount}(new bytes(0));
        if (!success) {
            revert IllegalState();
        }
    }

    /// @dev Checks the whitelist for msg.sender.
    ///
    /// Reverts if msg.sender is not in the whitelist.
    function _onlyWhitelisted() internal view {
        // Check if the message sender is an EOA. In the future, this potentially may break. It is important that functions
        // which rely on the whitelist not be explicitly vulnerable in the situation where this no longer holds true.
        if (tx.origin == msg.sender) {
            return;
        }

        // Only check the whitelist for calls from contracts.
        if (!IWhitelist(whitelist).isWhitelisted(msg.sender)) {
            revert Unauthorized();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

pragma solidity ^0.8.11;

/// @notice An error used to indicate that an action could not be completed because either the `msg.sender` or
///         `msg.origin` is not authorized.
error Unauthorized();

/// @notice An error used to indicate that an action could not be completed because the contract either already existed
///         or entered an illegal condition which is not recoverable from.
error IllegalState();

/// @notice An error used to indicate that an action could not be completed because of an illegal argument was passed
///         to the function.
error IllegalArgument();

pragma solidity >=0.5.0;

import "./alchemist/IAlchemistV2Actions.sol";
import "./alchemist/IAlchemistV2AdminActions.sol";
import "./alchemist/IAlchemistV2Errors.sol";
import "./alchemist/IAlchemistV2Immutables.sol";
import "./alchemist/IAlchemistV2Events.sol";
import "./alchemist/IAlchemistV2State.sol";

/// @title  IAlchemistV2
/// @author Alchemix Finance
interface IAlchemistV2 is
    IAlchemistV2Actions,
    IAlchemistV2AdminActions,
    IAlchemistV2Errors,
    IAlchemistV2Immutables,
    IAlchemistV2Events,
    IAlchemistV2State
{ }

pragma solidity >=0.5.0;

import "../IERC20Minimal.sol";
import "../IERC20Metadata.sol";

/// @title IWETH9
interface IWETH9 is IERC20Minimal, IERC20Metadata {
  /// @notice Deposits `msg.value` ethereum into the contract and mints `msg.value` tokens.
  function deposit() external payable;

  /// @notice Burns `amount` tokens to retrieve `amount` ethereum from the contract.
  ///
  /// @dev This version of WETH utilizes the `transfer` function which hard codes the amount of gas that is allowed
  ///      to be utilized to be exactly 2300 when receiving ethereum.
  ///
  /// @param amount The amount of tokens to burn.
  function withdraw(uint256 amount) external;
}

pragma solidity >=0.5.0;

/// @title  IWETHGateway
/// @author Alchemix Finance
interface IWETHGateway {
    /// @notice Refreshes the wrapped ethereum ERC20 approval for an alchemist contract.
    ///
    /// @param alchemist The address of the alchemist to refresh the allowance for.
    function refreshAllowance(address alchemist) external;

    /// @notice Takes ethereum, converts it to wrapped ethereum, and then deposits it into an alchemist.
    ///
    /// See [IAlchemistV2Actions.depositUnderlying](./alchemist/IAlchemistV2Actions.md#depositunderlying) for more details.
    ///
    /// @param alchemist        The address of the alchemist to deposit wrapped ethereum into.
    /// @param yieldToken       The yield token to deposit the wrapped ethereum as.
    /// @param amount           The amount of ethereum to deposit.
    /// @param recipient        The address which will receive the deposited yield tokens.
    /// @param minimumAmountOut The minimum amount of yield tokens that are expected to be deposited to `recipient`.
    function depositUnderlying(
        address alchemist,
        address yieldToken,
        uint256 amount,
        address recipient,
        uint256 minimumAmountOut
    ) external payable;

    /// @notice Withdraws a wrapped ethereum based yield token from an alchemist, converts it to ethereum, and then
    ///         transfers it to the recipient.
    ///
    /// A withdraw approval on the alchemist is required for this call to succeed.
    ///
    /// See [IAlchemistV2Actions.withdrawUnderlying](./alchemist/IAlchemistV2Actions.md#withdrawunderlying) for more details.
    ///
    /// @param alchemist        The address of the alchemist to withdraw wrapped ethereum from.
    /// @param yieldToken       The address of the yield token to withdraw.
    /// @param shares           The amount of shares to withdraw.
    /// @param recipient        The address which will receive the ethereum.
    /// @param minimumAmountOut The minimum amount of underlying tokens that are expected to be withdrawn to `recipient`.
    function withdrawUnderlying(
        address alchemist,
        address yieldToken,
        uint256 shares,
        address recipient,
        uint256 minimumAmountOut
    ) external;
}

pragma solidity ^0.8.11;

import "../base/Errors.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "../libraries/Sets.sol";

/// @title  Whitelist
/// @author Alchemix Finance
interface IWhitelist {
  /// @dev Emitted when a contract is added to the whitelist.
  ///
  /// @param account The account that was added to the whitelist.
  event AccountAdded(address account);

  /// @dev Emitted when a contract is removed from the whitelist.
  ///
  /// @param account The account that was removed from the whitelist.
  event AccountRemoved(address account);

  /// @dev Emitted when the whitelist is deactivated.
  event WhitelistDisabled();

  /// @dev Returns the list of addresses that are whitelisted for the given contract address.
  ///
  /// @return addresses The addresses that are whitelisted to interact with the given contract.
  function getAddresses() external view returns (address[] memory addresses);

  /// @dev Returns the disabled status of a given whitelist.
  ///
  /// @return disabled A flag denoting if the given whitelist is disabled.
  function disabled() external view returns (bool);

  /// @dev Adds an contract to the whitelist.
  ///
  /// @param caller The address to add to the whitelist.
  function add(address caller) external;

  /// @dev Adds a contract to the whitelist.
  ///
  /// @param caller The address to remove from the whitelist.
  function remove(address caller) external;

  /// @dev Disables the whitelist of the target whitelisted contract.
  ///
  /// This can only occur once. Once the whitelist is disabled, then it cannot be reenabled.
  function disable() external;

  /// @dev Checks that the `msg.sender` is whitelisted when it is not an EOA.
  ///
  /// @param account The account to check.
  ///
  /// @return whitelisted A flag denoting if the given account is whitelisted.
  function isWhitelisted(address account) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

pragma solidity >=0.5.0;

/// @title  IAlchemistV2Actions
/// @author Alchemix Finance
///
/// @notice Specifies user actions.
interface IAlchemistV2Actions {
    /// @notice Approve `spender` to mint `amount` debt tokens.
    ///
    /// **_NOTE:_** This function is WHITELISTED.
    ///
    /// @param spender The address that will be approved to mint.
    /// @param amount  The amount of tokens that `spender` will be allowed to mint.
    function approveMint(address spender, uint256 amount) external;

    /// @notice Approve `spender` to withdraw `amount` shares of `yieldToken`.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    ///
    /// @param spender    The address that will be approved to withdraw.
    /// @param yieldToken The address of the yield token that `spender` will be allowed to withdraw.
    /// @param shares     The amount of shares that `spender` will be allowed to withdraw.
    function approveWithdraw(
        address spender,
        address yieldToken,
        uint256 shares
    ) external;

    /// @notice Synchronizes the state of the account owned by `owner`.
    ///
    /// @param owner The owner of the account to synchronize.
    function poke(address owner) external;

    /// @notice Deposit a yield token into a user's account.
    ///
    /// @notice An approval must be set for `yieldToken` which is greater than `amount`.
    ///
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    /// @notice `yieldToken` must be enabled or this call will revert with a {TokenDisabled} error.
    /// @notice `yieldToken` underlying token must be enabled or this call will revert with a {TokenDisabled} error.
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    /// @notice `amount` must be greater than zero or the call will revert with an {IllegalArgument} error.
    ///
    /// @notice Emits a {Deposit} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    ///
    /// @notice **_NOTE:_** When depositing, the `AlchemistV2` contract must have **allowance()** to spend funds on behalf of **msg.sender** for at least **amount** of the **yieldToken** being deposited.  This can be done via the standard `ERC20.approve()` method.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice address ydai = 0xdA816459F1AB5631232FE5e97a05BBBb94970c95;
    /// @notice uint256 amount = 50000;
    /// @notice IERC20(ydai).approve(alchemistAddress, amount);
    /// @notice AlchemistV2(alchemistAddress).deposit(ydai, amount, msg.sender);
    /// @notice ```
    ///
    /// @param yieldToken The yield-token to deposit.
    /// @param amount     The amount of yield tokens to deposit.
    /// @param recipient  The owner of the account that will receive the resulting shares.
    ///
    /// @return sharesIssued The number of shares issued to `recipient`.
    function deposit(
        address yieldToken,
        uint256 amount,
        address recipient
    ) external returns (uint256 sharesIssued);

    /// @notice Deposit an underlying token into the account of `recipient` as `yieldToken`.
    ///
    /// @notice An approval must be set for the underlying token of `yieldToken` which is greater than `amount`.
    ///
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    /// @notice `amount` must be greater than zero or the call will revert with an {IllegalArgument} error.
    ///
    /// @notice Emits a {Deposit} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    /// @notice **_NOTE:_** When depositing, the `AlchemistV2` contract must have **allowance()** to spend funds on behalf of **msg.sender** for at least **amount** of the **underlyingToken** being deposited.  This can be done via the standard `ERC20.approve()` method.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice address ydai = 0xdA816459F1AB5631232FE5e97a05BBBb94970c95;
    /// @notice uint256 amount = 50000;
    /// @notice AlchemistV2(alchemistAddress).depositUnderlying(ydai, amount, msg.sender, 1);
    /// @notice ```
    ///
    /// @param yieldToken       The address of the yield token to wrap the underlying tokens into.
    /// @param amount           The amount of the underlying token to deposit.
    /// @param recipient        The address of the recipient.
    /// @param minimumAmountOut The minimum amount of yield tokens that are expected to be deposited to `recipient`.
    ///
    /// @return sharesIssued The number of shares issued to `recipient`.
    function depositUnderlying(
        address yieldToken,
        uint256 amount,
        address recipient,
        uint256 minimumAmountOut
    ) external returns (uint256 sharesIssued);

    /// @notice Withdraw yield tokens to `recipient` by burning `share` shares. The number of yield tokens withdrawn to `recipient` will depend on the value of shares for that yield token at the time of the call.
    ///
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    ///
    /// @notice Emits a {Withdraw} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice address ydai = 0xdA816459F1AB5631232FE5e97a05BBBb94970c95;
    /// @notice uint256 pps = AlchemistV2(alchemistAddress).getYieldTokensPerShare(ydai);
    /// @notice uint256 amtYieldTokens = 5000;
    /// @notice AlchemistV2(alchemistAddress).withdraw(ydai, amtYieldTokens / pps, msg.sender);
    /// @notice ```
    ///
    /// @param yieldToken The address of the yield token to withdraw.
    /// @param shares     The number of shares to burn.
    /// @param recipient  The address of the recipient.
    ///
    /// @return amountWithdrawn The number of yield tokens that were withdrawn to `recipient`.
    function withdraw(
        address yieldToken,
        uint256 shares,
        address recipient
    ) external returns (uint256 amountWithdrawn);

    /// @notice Withdraw yield tokens to `recipient` by burning `share` shares from the account of `owner`
    ///
    /// @notice `owner` must have an withdrawal allowance which is greater than `amount` for this call to succeed.
    ///
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    ///
    /// @notice Emits a {Withdraw} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice address ydai = 0xdA816459F1AB5631232FE5e97a05BBBb94970c95;
    /// @notice uint256 pps = AlchemistV2(alchemistAddress).getYieldTokensPerShare(ydai);
    /// @notice uint256 amtYieldTokens = 5000;
    /// @notice AlchemistV2(alchemistAddress).withdrawFrom(msg.sender, ydai, amtYieldTokens / pps, msg.sender);
    /// @notice ```
    ///
    /// @param owner      The address of the account owner to withdraw from.
    /// @param yieldToken The address of the yield token to withdraw.
    /// @param shares     The number of shares to burn.
    /// @param recipient  The address of the recipient.
    ///
    /// @return amountWithdrawn The number of yield tokens that were withdrawn to `recipient`.
    function withdrawFrom(
        address owner,
        address yieldToken,
        uint256 shares,
        address recipient
    ) external returns (uint256 amountWithdrawn);

    /// @notice Withdraw underlying tokens to `recipient` by burning `share` shares and unwrapping the yield tokens that the shares were redeemed for.
    ///
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    /// @notice The loss in expected value of `yieldToken` must be less than the maximum permitted by the system or this call will revert with a {LossExceeded} error.
    ///
    /// @notice Emits a {Withdraw} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    /// @notice **_NOTE:_** The caller of `withdrawFrom()` must have **withdrawAllowance()** to withdraw funds on behalf of **owner** for at least the amount of `yieldTokens` that **shares** will be converted to.  This can be done via the `approveWithdraw()` or `permitWithdraw()` methods.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice address ydai = 0xdA816459F1AB5631232FE5e97a05BBBb94970c95;
    /// @notice uint256 pps = AlchemistV2(alchemistAddress).getUnderlyingTokensPerShare(ydai);
    /// @notice uint256 amountUnderlyingTokens = 5000;
    /// @notice AlchemistV2(alchemistAddress).withdrawUnderlying(ydai, amountUnderlyingTokens / pps, msg.sender, 1);
    /// @notice ```
    ///
    /// @param yieldToken       The address of the yield token to withdraw.
    /// @param shares           The number of shares to burn.
    /// @param recipient        The address of the recipient.
    /// @param minimumAmountOut The minimum amount of underlying tokens that are expected to be withdrawn to `recipient`.
    ///
    /// @return amountWithdrawn The number of underlying tokens that were withdrawn to `recipient`.
    function withdrawUnderlying(
        address yieldToken,
        uint256 shares,
        address recipient,
        uint256 minimumAmountOut
    ) external returns (uint256 amountWithdrawn);

    /// @notice Withdraw underlying tokens to `recipient` by burning `share` shares from the account of `owner` and unwrapping the yield tokens that the shares were redeemed for.
    ///
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    /// @notice The loss in expected value of `yieldToken` must be less than the maximum permitted by the system or this call will revert with a {LossExceeded} error.
    ///
    /// @notice Emits a {Withdraw} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    /// @notice **_NOTE:_** The caller of `withdrawFrom()` must have **withdrawAllowance()** to withdraw funds on behalf of **owner** for at least the amount of `yieldTokens` that **shares** will be converted to.  This can be done via the `approveWithdraw()` or `permitWithdraw()` methods.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice address ydai = 0xdA816459F1AB5631232FE5e97a05BBBb94970c95;
    /// @notice uint256 pps = AlchemistV2(alchemistAddress).getUnderlyingTokensPerShare(ydai);
    /// @notice uint256 amtUnderlyingTokens = 5000 * 10**ydai.decimals();
    /// @notice AlchemistV2(alchemistAddress).withdrawUnderlying(msg.sender, ydai, amtUnderlyingTokens / pps, msg.sender, 1);
    /// @notice ```
    ///
    /// @param owner            The address of the account owner to withdraw from.
    /// @param yieldToken       The address of the yield token to withdraw.
    /// @param shares           The number of shares to burn.
    /// @param recipient        The address of the recipient.
    /// @param minimumAmountOut The minimum amount of underlying tokens that are expected to be withdrawn to `recipient`.
    ///
    /// @return amountWithdrawn The number of underlying tokens that were withdrawn to `recipient`.
    function withdrawUnderlyingFrom(
        address owner,
        address yieldToken,
        uint256 shares,
        address recipient,
        uint256 minimumAmountOut
    ) external returns (uint256 amountWithdrawn);

    /// @notice Mint `amount` debt tokens.
    ///
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    /// @notice `amount` must be greater than zero or this call will revert with a {IllegalArgument} error.
    ///
    /// @notice Emits a {Mint} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice uint256 amtDebt = 5000;
    /// @notice AlchemistV2(alchemistAddress).mint(amtDebt, msg.sender);
    /// @notice ```
    ///
    /// @param amount    The amount of tokens to mint.
    /// @param recipient The address of the recipient.
    function mint(uint256 amount, address recipient) external;

    /// @notice Mint `amount` debt tokens from the account owned by `owner` to `recipient`.
    ///
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    /// @notice `amount` must be greater than zero or this call will revert with a {IllegalArgument} error.
    ///
    /// @notice Emits a {Mint} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    /// @notice **_NOTE:_** The caller of `mintFrom()` must have **mintAllowance()** to mint debt from the `Account` controlled by **owner** for at least the amount of **yieldTokens** that **shares** will be converted to.  This can be done via the `approveMint()` or `permitMint()` methods.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice uint256 amtDebt = 5000;
    /// @notice AlchemistV2(alchemistAddress).mintFrom(msg.sender, amtDebt, msg.sender);
    /// @notice ```
    ///
    /// @param owner     The address of the owner of the account to mint from.
    /// @param amount    The amount of tokens to mint.
    /// @param recipient The address of the recipient.
    function mintFrom(
        address owner,
        uint256 amount,
        address recipient
    ) external;

    /// @notice Burn `amount` debt tokens to credit the account owned by `recipient`.
    ///
    /// @notice `amount` will be limited up to the amount of debt that `recipient` currently holds.
    ///
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    /// @notice `amount` must be greater than zero or this call will revert with a {IllegalArgument} error.
    /// @notice `recipient` must have non-zero debt or this call will revert with an {IllegalState} error.
    ///
    /// @notice Emits a {Burn} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice uint256 amtBurn = 5000;
    /// @notice AlchemistV2(alchemistAddress).burn(amtBurn, msg.sender);
    /// @notice ```
    ///
    /// @param amount    The amount of tokens to burn.
    /// @param recipient The address of the recipient.
    ///
    /// @return amountBurned The amount of tokens that were burned.
    function burn(uint256 amount, address recipient) external returns (uint256 amountBurned);

    /// @notice Repay `amount` debt using `underlyingToken` to credit the account owned by `recipient`.
    ///
    /// @notice `amount` will be limited up to the amount of debt that `recipient` currently holds.
    ///
    /// @notice `amount` must be greater than zero or this call will revert with a {IllegalArgument} error.
    /// @notice `recipient` must be non-zero or this call will revert with an {IllegalArgument} error.
    /// @notice `underlyingToken` must be enabled or this call will revert with a {TokenDisabled} error.
    /// @notice `amount` must be less than or equal to the current available repay limit or this call will revert with a {ReplayLimitExceeded} error.
    ///
    /// @notice Emits a {Repay} event.
    /// @notice **_NOTE:_** This function is WHITELISTED.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice address dai = 0x6b175474e89094c44da98b954eedeac495271d0f;
    /// @notice uint256 amtRepay = 5000;
    /// @notice AlchemistV2(alchemistAddress).repay(dai, amtRepay, msg.sender);
    /// @notice ```
    ///
    /// @param underlyingToken The address of the underlying token to repay.
    /// @param amount          The amount of the underlying token to repay.
    /// @param recipient       The address of the recipient which will receive credit.
    ///
    /// @return amountRepaid The amount of tokens that were repaid.
    function repay(
        address underlyingToken,
        uint256 amount,
        address recipient
    ) external returns (uint256 amountRepaid);

    /// @notice
    ///
    /// @notice `shares` will be limited up to an equal amount of debt that `recipient` currently holds.
    ///
    /// @notice `shares` must be greater than zero or this call will revert with a {IllegalArgument} error.
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    /// @notice `yieldToken` must be enabled or this call will revert with a {TokenDisabled} error.
    /// @notice `yieldToken` underlying token must be enabled or this call will revert with a {TokenDisabled} error.
    /// @notice The loss in expected value of `yieldToken` must be less than the maximum permitted by the system or this call will revert with a {LossExceeded} error.
    /// @notice `amount` must be less than or equal to the current available liquidation limit or this call will revert with a {LiquidationLimitExceeded} error.
    ///
    /// @notice Emits a {Liquidate} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice address ydai = 0xdA816459F1AB5631232FE5e97a05BBBb94970c95;
    /// @notice uint256 amtSharesLiquidate = 5000 * 10**ydai.decimals();
    /// @notice AlchemistV2(alchemistAddress).liquidate(ydai, amtSharesLiquidate, 1);
    /// @notice ```
    ///
    /// @param yieldToken       The address of the yield token to liquidate.
    /// @param shares           The number of shares to burn for credit.
    /// @param minimumAmountOut The minimum amount of underlying tokens that are expected to be liquidated.
    ///
    /// @return sharesLiquidated The amount of shares that were liquidated.
    function liquidate(
        address yieldToken,
        uint256 shares,
        uint256 minimumAmountOut
    ) external returns (uint256 sharesLiquidated);

    /// @notice Burns `amount` debt tokens to credit accounts which have deposited `yieldToken`.
    ///
    /// @notice `amount` must be greater than zero or this call will revert with a {IllegalArgument} error.
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    ///
    /// @notice Emits a {Donate} event.
    ///
    /// @notice **_NOTE:_** This function is WHITELISTED.
    ///
    /// @notice **Example:**
    /// @notice ```
    /// @notice address ydai = 0xdA816459F1AB5631232FE5e97a05BBBb94970c95;
    /// @notice uint256 amtSharesLiquidate = 5000;
    /// @notice AlchemistV2(alchemistAddress).liquidate(dai, amtSharesLiquidate, 1);
    /// @notice ```
    ///
    /// @param yieldToken The address of the yield token to credit accounts for.
    /// @param amount     The amount of debt tokens to burn.
    function donate(address yieldToken, uint256 amount) external;

    /// @notice Harvests outstanding yield that a yield token has accumulated and distributes it as credit to holders.
    ///
    /// @notice `msg.sender` must be a keeper or this call will revert with an {Unauthorized} error.
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    /// @notice The amount being harvested must be greater than zero or else this call will revert with an {IllegalState} error.
    ///
    /// @notice Emits a {Harvest} event.
    ///
    /// @param yieldToken       The address of the yield token to harvest.
    /// @param minimumAmountOut The minimum amount of underlying tokens that are expected to be withdrawn to `recipient`.
    function harvest(address yieldToken, uint256 minimumAmountOut) external;
}

pragma solidity >=0.5.0;

/// @title  IAlchemistV2AdminActions
/// @author Alchemix Finance
///
/// @notice Specifies admin and or sentinel actions.
interface IAlchemistV2AdminActions {
    /// @notice Contract initialization parameters.
    struct InitializationParams {
        // The initial admin account.
        address admin;
        // The ERC20 token used to represent debt.
        address debtToken;
        // The initial transmuter or transmuter buffer.
        address transmuter;
        // The minimum collateralization ratio that an account must maintain.
        uint256 minimumCollateralization;
        // The percentage fee taken from each harvest measured in units of basis points.
        uint256 protocolFee;
        // The address that receives protocol fees.
        address protocolFeeReceiver;
        // A limit used to prevent administrators from making minting functionality inoperable.
        uint256 mintingLimitMinimum;
        // The maximum number of tokens that can be minted per period of time.
        uint256 mintingLimitMaximum;
        // The number of blocks that it takes for the minting limit to be refreshed.
        uint256 mintingLimitBlocks;
        // The address of the whitelist.
        address whitelist;
    }

    /// @notice Configuration parameters for an underlying token.
    struct UnderlyingTokenConfig {
        // A limit used to prevent administrators from making repayment functionality inoperable.
        uint256 repayLimitMinimum;
        // The maximum number of underlying tokens that can be repaid per period of time.
        uint256 repayLimitMaximum;
        // The number of blocks that it takes for the repayment limit to be refreshed.
        uint256 repayLimitBlocks;
        // A limit used to prevent administrators from making liquidation functionality inoperable.
        uint256 liquidationLimitMinimum;
        // The maximum number of underlying tokens that can be liquidated per period of time.
        uint256 liquidationLimitMaximum;
        // The number of blocks that it takes for the liquidation limit to be refreshed.
        uint256 liquidationLimitBlocks;
    }

    /// @notice Configuration parameters of a yield token.
    struct YieldTokenConfig {
        // The adapter used by the system to interop with the token.
        address adapter;
        // The maximum percent loss in expected value that can occur before certain actions are disabled measured in
        // units of basis points.
        uint256 maximumLoss;
        // The maximum value that can be held by the system before certain actions are disabled measured in the
        // underlying token.
        uint256 maximumExpectedValue;
        // The number of blocks that credit will be distributed over to depositors.
        uint256 creditUnlockBlocks;
    }

    /// @notice Initialize the contract.
    ///
    /// @notice `params.protocolFee` must be in range or this call will with an {IllegalArgument} error.
    /// @notice The minting growth limiter parameters must be valid or this will revert with an {IllegalArgument} error. For more information, see the {Limiters} library.
    ///
    /// @notice Emits an {AdminUpdated} event.
    /// @notice Emits a {TransmuterUpdated} event.
    /// @notice Emits a {MinimumCollateralizationUpdated} event.
    /// @notice Emits a {ProtocolFeeUpdated} event.
    /// @notice Emits a {ProtocolFeeReceiverUpdated} event.
    /// @notice Emits a {MintingLimitUpdated} event.
    ///
    /// @param params The contract initialization parameters.
    function initialize(InitializationParams memory params) external;

    /// @notice Sets the pending administrator.
    ///
    /// @notice `msg.sender` must be the admin or this call will will revert with an {Unauthorized} error.
    ///
    /// @notice Emits a {PendingAdminUpdated} event.
    ///
    /// @dev This is the first step in the two-step process of setting a new administrator. After this function is called, the pending administrator will then need to call {acceptAdmin} to complete the process.
    ///
    /// @param value the address to set the pending admin to.
    function setPendingAdmin(address value) external;

    /// @notice Allows for `msg.sender` to accepts the role of administrator.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice The current pending administrator must be non-zero or this call will revert with an {IllegalState} error.
    ///
    /// @dev This is the second step in the two-step process of setting a new administrator. After this function is successfully called, this pending administrator will be reset and the new administrator will be set.
    ///
    /// @notice Emits a {AdminUpdated} event.
    /// @notice Emits a {PendingAdminUpdated} event.
    function acceptAdmin() external;

    /// @notice Sets an address as a sentinel.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    ///
    /// @param sentinel The address to set or unset as a sentinel.
    /// @param flag     A flag indicating of the address should be set or unset as a sentinel.
    function setSentinel(address sentinel, bool flag) external;

    /// @notice Sets an address as a keeper.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    ///
    /// @param keeper The address to set or unset as a keeper.
    /// @param flag   A flag indicating of the address should be set or unset as a keeper.
    function setKeeper(address keeper, bool flag) external;

    /// @notice Adds an underlying token to the system.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    ///
    /// @param underlyingToken The address of the underlying token to add.
    /// @param config          The initial underlying token configuration.
    function addUnderlyingToken(
        address underlyingToken,
        UnderlyingTokenConfig calldata config
    ) external;

    /// @notice Adds a yield token to the system.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    ///
    /// @notice Emits a {AddYieldToken} event.
    /// @notice Emits a {TokenAdapterUpdated} event.
    /// @notice Emits a {MaximumLossUpdated} event.
    ///
    /// @param yieldToken The address of the yield token to add.
    /// @param config     The initial yield token configuration.
    function addYieldToken(address yieldToken, YieldTokenConfig calldata config)
        external;

    /// @notice Sets an underlying token as either enabled or disabled.
    ///
    /// @notice `msg.sender` must be either the admin or a sentinel or this call will revert with an {Unauthorized} error.
    /// @notice `underlyingToken` must be registered or this call will revert with a {UnsupportedToken} error.
    ///
    /// @notice Emits an {UnderlyingTokenEnabled} event.
    ///
    /// @param underlyingToken The address of the underlying token to enable or disable.
    /// @param enabled         If the underlying token should be enabled or disabled.
    function setUnderlyingTokenEnabled(address underlyingToken, bool enabled)
        external;

    /// @notice Sets a yield token as either enabled or disabled.
    ///
    /// @notice `msg.sender` must be either the admin or a sentinel or this call will revert with an {Unauthorized} error.
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    ///
    /// @notice Emits a {YieldTokenEnabled} event.
    ///
    /// @param yieldToken The address of the yield token to enable or disable.
    /// @param enabled    If the underlying token should be enabled or disabled.
    function setYieldTokenEnabled(address yieldToken, bool enabled) external;

    /// @notice Configures the the repay limit of `underlyingToken`.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice `underlyingToken` must be registered or this call will revert with a {UnsupportedToken} error.
    ///
    /// @notice Emits a {ReplayLimitUpdated} event.
    ///
    /// @param underlyingToken The address of the underlying token to configure the repay limit of.
    /// @param maximum         The maximum repay limit.
    /// @param blocks          The number of blocks it will take for the maximum repayment limit to be replenished when it is completely exhausted.
    function configureRepayLimit(
        address underlyingToken,
        uint256 maximum,
        uint256 blocks
    ) external;

    /// @notice Configure the liquidation limiter of `underlyingToken`.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice `underlyingToken` must be registered or this call will revert with a {UnsupportedToken} error.
    ///
    /// @notice Emits a {LiquidationLimitUpdated} event.
    ///
    /// @param underlyingToken The address of the underlying token to configure the liquidation limit of.
    /// @param maximum         The maximum liquidation limit.
    /// @param blocks          The number of blocks it will take for the maximum liquidation limit to be replenished when it is completely exhausted.
    function configureLiquidationLimit(
        address underlyingToken,
        uint256 maximum,
        uint256 blocks
    ) external;

    /// @notice Set the address of the transmuter.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice `value` must be non-zero or this call will revert with an {IllegalArgument} error.
    ///
    /// @notice Emits a {TransmuterUpdated} event.
    ///
    /// @param value The address of the transmuter.
    function setTransmuter(address value) external;

    /// @notice Set the minimum collateralization ratio.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    ///
    /// @notice Emits a {MinimumCollateralizationUpdated} event.
    ///
    /// @param value The new minimum collateralization ratio.
    function setMinimumCollateralization(uint256 value) external;

    /// @notice Sets the fee that the protocol will take from harvests.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice `value` must be in range or this call will with an {IllegalArgument} error.
    ///
    /// @notice Emits a {ProtocolFeeUpdated} event.
    ///
    /// @param value The value to set the protocol fee to measured in basis points.
    function setProtocolFee(uint256 value) external;

    /// @notice Sets the address which will receive protocol fees.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice `value` must be non-zero or this call will revert with an {IllegalArgument} error.
    ///
    /// @notice Emits a {ProtocolFeeReceiverUpdated} event.
    ///
    /// @param value The address to set the protocol fee receiver to.
    function setProtocolFeeReceiver(address value) external;

    /// @notice Configures the minting limiter.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    ///
    /// @notice Emits a {MintingLimitUpdated} event.
    ///
    /// @param maximum The maximum minting limit.
    /// @param blocks  The number of blocks it will take for the maximum minting limit to be replenished when it is completely exhausted.
    function configureMintingLimit(uint256 maximum, uint256 blocks) external;

    /// @notice Sets the rate at which credit will be completely available to depositors after it is harvested.
    ///
    /// @notice Emits a {CreditUnlockRateUpdated} event.
    ///
    /// @param yieldToken The address of the yield token to set the credit unlock rate for.
    /// @param blocks     The number of blocks that it will take before the credit will be unlocked.
    function configureCreditUnlockRate(address yieldToken, uint256 blocks) external;

    /// @notice Sets the token adapter of a yield token.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    /// @notice The token that `adapter` supports must be `yieldToken` or this call will revert with a {IllegalState} error.
    ///
    /// @notice Emits a {TokenAdapterUpdated} event.
    ///
    /// @param yieldToken The address of the yield token to set the adapter for.
    /// @param adapter    The address to set the token adapter to.
    function setTokenAdapter(address yieldToken, address adapter) external;

    /// @notice Sets the maximum expected value of a yield token that the system can hold.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    ///
    /// @param yieldToken The address of the yield token to set the maximum expected value for.
    /// @param value      The maximum expected value of the yield token denoted measured in its underlying token.
    function setMaximumExpectedValue(address yieldToken, uint256 value)
        external;

    /// @notice Sets the maximum loss that a yield bearing token will permit before restricting certain actions.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    ///
    /// @dev There are two types of loss of value for yield bearing assets: temporary or permanent. The system will automatically restrict actions which are sensitive to both forms of loss when detected. For example, deposits must be restricted when an excessive loss is encountered to prevent users from having their collateral harvested from them. While the user would receive credit, which then could be exchanged for value equal to the collateral that was harvested from them, it is seen as a negative user experience because the value of their collateral should have been higher than what was originally recorded when they made their deposit.
    ///
    /// @param yieldToken The address of the yield bearing token to set the maximum loss for.
    /// @param value      The value to set the maximum loss to. This is in units of basis points.
    function setMaximumLoss(address yieldToken, uint256 value) external;

    /// @notice Snap the expected value `yieldToken` to the current value.
    ///
    /// @notice `msg.sender` must be the admin or this call will revert with an {Unauthorized} error.
    /// @notice `yieldToken` must be registered or this call will revert with a {UnsupportedToken} error.
    ///
    /// @dev This function should only be used in the event of a loss in the target yield-token. For example, say a third-party protocol experiences a fifty percent loss. The expected value (amount of underlying tokens) of the yield tokens being held by the system would be two times the real value that those yield tokens could be redeemed for. This function gives governance a way to realize those losses so that users can continue using the token as normal.
    ///
    /// @param yieldToken The address of the yield token to snap.
    function snap(address yieldToken) external;
}

pragma solidity >=0.5.0;

/// @title  IAlchemistV2Errors
/// @author Alchemix Finance
///
/// @notice Specifies errors.
interface IAlchemistV2Errors {
    /// @notice An error which is used to indicate that an operation failed because it tried to operate on a token that the system did not recognize.
    ///
    /// @param token The address of the token.
    error UnsupportedToken(address token);

    /// @notice An error which is used to indicate that an operation failed because it tried to operate on a token that has been disabled.
    ///
    /// @param token The address of the token.
    error TokenDisabled(address token);

    /// @notice An error which is used to indicate that an operation failed because an account became undercollateralized.
    error Undercollateralized();

    /// @notice An error which is used to indicate that an operation failed because the expected value of a yield token in the system exceeds the maximum value permitted.
    ///
    /// @param yieldToken           The address of the yield token.
    /// @param expectedValue        The expected value measured in units of the underlying token.
    /// @param maximumExpectedValue The maximum expected value permitted measured in units of the underlying token.
    error ExpectedValueExceeded(address yieldToken, uint256 expectedValue, uint256 maximumExpectedValue);

    /// @notice An error which is used to indicate that an operation failed because the loss that a yield token in the system exceeds the maximum value permitted.
    ///
    /// @param yieldToken  The address of the yield token.
    /// @param loss        The amount of loss measured in basis points.
    /// @param maximumLoss The maximum amount of loss permitted measured in basis points.
    error LossExceeded(address yieldToken, uint256 loss, uint256 maximumLoss);

    /// @notice An error which is used to indicate that a minting operation failed because the minting limit has been exceeded.
    ///
    /// @param amount    The amount of debt tokens that were requested to be minted.
    /// @param available The amount of debt tokens which are available to mint.
    error MintingLimitExceeded(uint256 amount, uint256 available);

    /// @notice An error which is used to indicate that an repay operation failed because the repay limit for an underlying token has been exceeded.
    ///
    /// @param underlyingToken The address of the underlying token.
    /// @param amount          The amount of underlying tokens that were requested to be repaid.
    /// @param available       The amount of underlying tokens that are available to be repaid.
    error RepayLimitExceeded(address underlyingToken, uint256 amount, uint256 available);

    /// @notice An error which is used to indicate that an repay operation failed because the liquidation limit for an underlying token has been exceeded.
    ///
    /// @param underlyingToken The address of the underlying token.
    /// @param amount          The amount of underlying tokens that were requested to be liquidated.
    /// @param available       The amount of underlying tokens that are available to be liquidated.
    error LiquidationLimitExceeded(address underlyingToken, uint256 amount, uint256 available);

    /// @notice An error which is used to indicate that the slippage of a wrap or unwrap operation was exceeded.
    ///
    /// @param amount           The amount of underlying or yield tokens returned by the operation.
    /// @param minimumAmountOut The minimum amount of the underlying or yield token that was expected when performing
    ///                         the operation.
    error SlippageExceeded(uint256 amount, uint256 minimumAmountOut);
}

pragma solidity >=0.5.0;

/// @title  IAlchemistV2Immutables
/// @author Alchemix Finance
interface IAlchemistV2Immutables {
    /// @notice Returns the version of the alchemist.
    ///
    /// @return The version.
    function version() external view returns (string memory);

    /// @notice Returns the address of the debt token used by the system.
    ///
    /// @return The address of the debt token.
    function debtToken() external view returns (address);
}

pragma solidity >=0.5.0;

/// @title  IAlchemistV2Events
/// @author Alchemix Finance
interface IAlchemistV2Events {
    /// @notice Emitted when the pending admin is updated.
    ///
    /// @param pendingAdmin The address of the pending admin.
    event PendingAdminUpdated(address pendingAdmin);

    /// @notice Emitted when the administrator is updated.
    ///
    /// @param admin The address of the administrator.
    event AdminUpdated(address admin);

    /// @notice Emitted when an address is set or unset as a sentinel.
    ///
    /// @param sentinel The address of the sentinel.
    /// @param flag     A flag indicating if `sentinel` was set or unset as a sentinel.
    event SentinelSet(address sentinel, bool flag);

    /// @notice Emitted when an address is set or unset as a keeper.
    ///
    /// @param sentinel The address of the keeper.
    /// @param flag     A flag indicating if `keeper` was set or unset as a sentinel.
    event KeeperSet(address sentinel, bool flag);

    /// @notice Emitted when an underlying token is added.
    ///
    /// @param underlyingToken The address of the underlying token that was added.
    event AddUnderlyingToken(address indexed underlyingToken);

    /// @notice Emitted when a yield token is added.
    ///
    /// @param yieldToken The address of the yield token that was added.
    event AddYieldToken(address indexed yieldToken);

    /// @notice Emitted when an underlying token is enabled or disabled.
    ///
    /// @param underlyingToken The address of the underlying token that was enabled or disabled.
    /// @param enabled         A flag indicating if the underlying token was enabled or disabled.
    event UnderlyingTokenEnabled(address indexed underlyingToken, bool enabled);

    /// @notice Emitted when an yield token is enabled or disabled.
    ///
    /// @param yieldToken The address of the yield token that was enabled or disabled.
    /// @param enabled    A flag indicating if the yield token was enabled or disabled.
    event YieldTokenEnabled(address indexed yieldToken, bool enabled);

    /// @notice Emitted when the repay limit of an underlying token is updated.
    ///
    /// @param underlyingToken The address of the underlying token.
    /// @param maximum         The updated maximum repay limit.
    /// @param blocks          The updated number of blocks it will take for the maximum repayment limit to be replenished when it is completely exhausted.
    event RepayLimitUpdated(address indexed underlyingToken, uint256 maximum, uint256 blocks);

    /// @notice Emitted when the liquidation limit of an underlying token is updated.
    ///
    /// @param underlyingToken The address of the underlying token.
    /// @param maximum         The updated maximum liquidation limit.
    /// @param blocks          The updated number of blocks it will take for the maximum liquidation limit to be replenished when it is completely exhausted.
    event LiquidationLimitUpdated(address indexed underlyingToken, uint256 maximum, uint256 blocks);

    /// @notice Emitted when the transmuter is updated.
    ///
    /// @param transmuter The updated address of the transmuter.
    event TransmuterUpdated(address transmuter);

    /// @notice Emitted when the minimum collateralization is updated.
    ///
    /// @param minimumCollateralization The updated minimum collateralization.
    event MinimumCollateralizationUpdated(uint256 minimumCollateralization);

    /// @notice Emitted when the protocol fee is updated.
    ///
    /// @param protocolFee The updated protocol fee.
    event ProtocolFeeUpdated(uint256 protocolFee);
    
    /// @notice Emitted when the protocol fee receiver is updated.
    ///
    /// @param protocolFeeReceiver The updated address of the protocol fee receiver.
    event ProtocolFeeReceiverUpdated(address protocolFeeReceiver);

    /// @notice Emitted when the minting limit is updated.
    ///
    /// @param maximum The updated maximum minting limit.
    /// @param blocks  The updated number of blocks it will take for the maximum minting limit to be replenished when it is completely exhausted.
    event MintingLimitUpdated(uint256 maximum, uint256 blocks);

    /// @notice Emitted when the credit unlock rate is updated.
    ///
    /// @param yieldToken The address of the yield token.
    /// @param blocks     The number of blocks that distributed credit will unlock over.
    event CreditUnlockRateUpdated(address yieldToken, uint256 blocks);

    /// @notice Emitted when the adapter of a yield token is updated.
    ///
    /// @param yieldToken   The address of the yield token.
    /// @param tokenAdapter The updated address of the token adapter.
    event TokenAdapterUpdated(address yieldToken, address tokenAdapter);

    /// @notice Emitted when the maximum expected value of a yield token is updated.
    ///
    /// @param yieldToken           The address of the yield token.
    /// @param maximumExpectedValue The updated maximum expected value.
    event MaximumExpectedValueUpdated(address indexed yieldToken, uint256 maximumExpectedValue);

    /// @notice Emitted when the maximum loss of a yield token is updated.
    ///
    /// @param yieldToken  The address of the yield token.
    /// @param maximumLoss The updated maximum loss.
    event MaximumLossUpdated(address indexed yieldToken, uint256 maximumLoss);

    /// @notice Emitted when the expected value of a yield token is snapped to its current value.
    ///
    /// @param yieldToken    The address of the yield token.
    /// @param expectedValue The updated expected value measured in the yield token's underlying token.
    event Snap(address indexed yieldToken, uint256 expectedValue);

    /// @notice Emitted when `owner` grants `spender` the ability to mint debt tokens on its behalf.
    ///
    /// @param owner   The address of the account owner.
    /// @param spender The address which is being permitted to mint tokens on the behalf of `owner`.
    /// @param amount  The amount of debt tokens that `spender` is allowed to mint.
    event ApproveMint(address indexed owner, address indexed spender, uint256 amount);

    /// @notice Emitted when `owner` grants `spender` the ability to withdraw `yieldToken` from its account.
    ///
    /// @param owner      The address of the account owner.
    /// @param spender    The address which is being permitted to mint tokens on the behalf of `owner`.
    /// @param yieldToken The address of the yield token that `spender` is allowed to withdraw.
    /// @param amount     The amount of shares of `yieldToken` that `spender` is allowed to withdraw.
    event ApproveWithdraw(address indexed owner, address indexed spender, address indexed yieldToken, uint256 amount);

    /// @notice Emitted when a user deposits `amount of `yieldToken` to `recipient`.
    ///
    /// @notice This event does not imply that `sender` directly deposited yield tokens. It is possible that the
    ///         underlying tokens were wrapped.
    ///
    /// @param sender       The address of the user which deposited funds.
    /// @param yieldToken   The address of the yield token that was deposited.
    /// @param amount       The amount of yield tokens that were deposited.
    /// @param recipient    The address that received the deposited funds.
    event Deposit(address indexed sender, address indexed yieldToken, uint256 amount, address recipient);

    /// @notice Emitted when `shares` shares of `yieldToken` are burned to withdraw `yieldToken` from the account owned
    ///         by `owner` to `recipient`.
    ///
    /// @notice This event does not imply that `recipient` received yield tokens. It is possible that the yield tokens
    ///         were unwrapped.
    ///
    /// @param owner      The address of the account owner.
    /// @param yieldToken The address of the yield token that was withdrawn.
    /// @param shares     The amount of shares that were burned.
    /// @param recipient  The address that received the withdrawn funds.
    event Withdraw(address indexed owner, address indexed yieldToken, uint256 shares, address recipient);

    /// @notice Emitted when `amount` debt tokens are minted to `recipient` using the account owned by `owner`.
    ///
    /// @param owner     The address of the account owner.
    /// @param amount    The amount of tokens that were minted.
    /// @param recipient The recipient of the minted tokens.
    event Mint(address indexed owner, uint256 amount, address recipient);

    /// @notice Emitted when `sender` burns `amount` debt tokens to grant credit to `recipient`.
    ///
    /// @param sender    The address which is burning tokens.
    /// @param amount    The amount of tokens that were burned.
    /// @param recipient The address that received credit for the burned tokens.
    event Burn(address indexed sender, uint256 amount, address recipient);

    /// @notice Emitted when `amount` of `underlyingToken` are repaid to grant credit to `recipient`.
    ///
    /// @param sender          The address which is repaying tokens.
    /// @param underlyingToken The address of the underlying token that was used to repay debt.
    /// @param amount          The amount of the underlying token that was used to repay debt.
    /// @param recipient       The address that received credit for the repaid tokens.
    event Repay(address indexed sender, address indexed underlyingToken, uint256 amount, address recipient);

    /// @notice Emitted when `sender` liquidates `share` shares of `yieldToken`.
    ///
    /// @param owner           The address of the account owner liquidating shares.
    /// @param yieldToken      The address of the yield token.
    /// @param underlyingToken The address of the underlying token.
    /// @param shares          The amount of the shares of `yieldToken` that were liquidated.
    event Liquidate(address indexed owner, address indexed yieldToken, address indexed underlyingToken, uint256 shares);

    /// @notice Emitted when `sender` burns `amount` debt tokens to grant credit to users who have deposited `yieldToken`.
    ///
    /// @param sender     The address which burned debt tokens.
    /// @param yieldToken The address of the yield token.
    /// @param amount     The amount of debt tokens which were burned.
    event Donate(address indexed sender, address indexed yieldToken, uint256 amount);

    /// @notice Emitted when `yieldToken` is harvested.
    ///
    /// @param yieldToken     The address of the yield token that was harvested.
    /// @param minimumAmountOut    The maximum amount of loss that is acceptable when unwrapping the underlying tokens into yield tokens, measured in basis points.
    /// @param totalHarvested The total amount of underlying tokens harvested.
    event Harvest(address indexed yieldToken, uint256 minimumAmountOut, uint256 totalHarvested);
}

pragma solidity >=0.5.0;

/// @title  IAlchemistV2State
/// @author Alchemix Finance
interface IAlchemistV2State {
    /// @notice Defines underlying token parameters.
    struct UnderlyingTokenParams {
        // The number of decimals the token has. This value is cached once upon registering the token so it is important
        // that the decimals of the token are immutable or the system will begin to have computation errors.
        uint8 decimals;
        // A coefficient used to normalize the token to a value comparable to the debt token. For example, if the
        // underlying token is 8 decimals and the debt token is 18 decimals then the conversion factor will be
        // 10^10. One unit of the underlying token will be comparably equal to one unit of the debt token.
        uint256 conversionFactor;
        // A flag to indicate if the token is enabled.
        bool enabled;
    }

    /// @notice Defines yield token parameters.
    struct YieldTokenParams {
        // The number of decimals the token has. This value is cached once upon registering the token so it is important
        // that the decimals of the token are immutable or the system will begin to have computation errors.
        uint8 decimals;
        // The associated underlying token that can be redeemed for the yield-token.
        address underlyingToken;
        // The adapter used by the system to wrap, unwrap, and lookup the conversion rate of this token into its
        // underlying token.
        address adapter;
        // The maximum percentage loss that is acceptable before disabling certain actions.
        uint256 maximumLoss;
        // The maximum value of yield tokens that the system can hold, measured in units of the underlying token.
        uint256 maximumExpectedValue;
        // The percent of credit that will be unlocked per block. The representation of this value is a 18  decimal
        // fixed point integer.
        uint256 creditUnlockRate;
        // The current balance of yield tokens which are held by users.
        uint256 activeBalance;
        // The current balance of yield tokens which are earmarked to be harvested by the system at a later time.
        uint256 harvestableBalance;
        // The total number of shares that have been minted for this token.
        uint256 totalShares;
        // The expected value of the tokens measured in underlying tokens. This value controls how much of the token
        // can be harvested. When users deposit yield tokens, it increases the expected value by how much the tokens
        // are exchangeable for in the underlying token. When users withdraw yield tokens, it decreases the expected
        // value by how much the tokens are exchangeable for in the underlying token.
        uint256 expectedValue;
        // The current amount of credit which is will be distributed over time to depositors.
        uint256 pendingCredit;
        // The amount of the pending credit that has been distributed.
        uint256 distributedCredit;
        // The block number which the last credit distribution occurred.
        uint256 lastDistributionBlock;
        // The total accrued weight. This is used to calculate how much credit a user has been granted over time. The
        // representation of this value is a 18 decimal fixed point integer.
        uint256 accruedWeight;
        // A flag to indicate if the token is enabled.
        bool enabled;
    }

    /// @notice Gets the address of the admin.
    ///
    /// @return admin The admin address.
    function admin() external view returns (address admin);

    /// @notice Gets the address of the pending administrator.
    ///
    /// @return pendingAdmin The pending administrator address.
    function pendingAdmin() external view returns (address pendingAdmin);

    /// @notice Gets if an address is a sentinel.
    ///
    /// @param sentinel The address to check.
    ///
    /// @return isSentinel If the address is a sentinel.
    function sentinels(address sentinel) external view returns (bool isSentinel);

    /// @notice Gets if an address is a keeper.
    ///
    /// @param keeper The address to check.
    ///
    /// @return isKeeper If the address is a keeper
    function keepers(address keeper) external view returns (bool isKeeper);

    /// @notice Gets the address of the transmuter.
    ///
    /// @return transmuter The transmuter address.
    function transmuter() external view returns (address transmuter);

    /// @notice Gets the minimum collateralization.
    ///
    /// @notice Collateralization is determined by taking the total value of collateral that a user has deposited into their account and dividing it their debt.
    ///
    /// @dev The value returned is a 18 decimal fixed point integer.
    ///
    /// @return minimumCollateralization The minimum collateralization.
    function minimumCollateralization() external view returns (uint256 minimumCollateralization);

    /// @notice Gets the protocol fee.
    ///
    /// @return protocolFee The protocol fee.
    function protocolFee() external view returns (uint256 protocolFee);

    /// @notice Gets the protocol fee receiver.
    ///
    /// @return protocolFeeReceiver The protocol fee receiver.
    function protocolFeeReceiver() external view returns (address protocolFeeReceiver);

    /// @notice Gets the address of the whitelist contract.
    ///
    /// @return whitelist The address of the whitelist contract.
    function whitelist() external view returns (address whitelist);
    
    /// @notice Gets the conversion rate of underlying tokens per share.
    ///
    /// @param yieldToken The address of the yield token to get the conversion rate for.
    ///
    /// @return rate The rate of underlying tokens per share.
    function getUnderlyingTokensPerShare(address yieldToken) external view returns (uint256 rate);

    /// @notice Gets the conversion rate of yield tokens per share.
    ///
    /// @param yieldToken The address of the yield token to get the conversion rate for.
    ///
    /// @return rate The rate of yield tokens per share.
    function getYieldTokensPerShare(address yieldToken) external view returns (uint256 rate);

    /// @notice Gets the supported underlying tokens.
    ///
    /// @dev The order of the entries returned by this function is not guaranteed to be consistent between calls.
    ///
    /// @return tokens The supported underlying tokens.
    function getSupportedUnderlyingTokens() external view returns (address[] memory tokens);

    /// @notice Gets the supported yield tokens.
    ///
    /// @dev The order of the entries returned by this function is not guaranteed to be consistent between calls.
    ///
    /// @return tokens The supported yield tokens.
    function getSupportedYieldTokens() external view returns (address[] memory tokens);

    /// @notice Gets if an underlying token is supported.
    ///
    /// @param underlyingToken The address of the underlying token to check.
    ///
    /// @return isSupported If the underlying token is supported.
    function isSupportedUnderlyingToken(address underlyingToken) external view returns (bool isSupported);

    /// @notice Gets if a yield token is supported.
    ///
    /// @param yieldToken The address of the yield token to check.
    ///
    /// @return isSupported If the yield token is supported.
    function isSupportedYieldToken(address yieldToken) external view returns (bool isSupported);

    /// @notice Gets information about the account owned by `owner`.
    ///
    /// @param owner The address that owns the account.
    ///
    /// @return debt            The unrealized amount of debt that the account had incurred.
    /// @return depositedTokens The yield tokens that the owner has deposited.
    function accounts(address owner) external view returns (int256 debt, address[] memory depositedTokens);

    /// @notice Gets information about a yield token position for the account owned by `owner`.
    ///
    /// @param owner      The address that owns the account.
    /// @param yieldToken The address of the yield token to get the position of.
    ///
    /// @return shares            The amount of shares of that `owner` owns of the yield token.
    /// @return lastAccruedWeight The last recorded accrued weight of the yield token.
    function positions(address owner, address yieldToken)
        external view
        returns (
            uint256 shares,
            uint256 lastAccruedWeight
        );

    /// @notice Gets the amount of debt tokens `spender` is allowed to mint on behalf of `owner`.
    ///
    /// @param owner   The owner of the account.
    /// @param spender The address which is allowed to mint on behalf of `owner`.
    ///
    /// @return allowance The amount of debt tokens that `spender` can mint on behalf of `owner`.
    function mintAllowance(address owner, address spender) external view returns (uint256 allowance);

    /// @notice Gets the amount of shares of `yieldToken` that `spender` is allowed to withdraw on behalf of `owner`.
    ///
    /// @param owner      The owner of the account.
    /// @param spender    The address which is allowed to withdraw on behalf of `owner`.
    /// @param yieldToken The address of the yield token.
    ///
    /// @return allowance The amount of shares that `spender` can withdraw on behalf of `owner`.
    function withdrawAllowance(address owner, address spender, address yieldToken) external view returns (uint256 allowance);

    /// @notice Gets the parameters of an underlying token.
    ///
    /// @param underlyingToken The address of the underlying token.
    ///
    /// @return params The underlying token parameters.
    function getUnderlyingTokenParameters(address underlyingToken)
        external view
        returns (UnderlyingTokenParams memory params);

    /// @notice Get the parameters and state of a yield-token.
    ///
    /// @param yieldToken The address of the yield token.
    ///
    /// @return params The yield token parameters.
    function getYieldTokenParameters(address yieldToken)
        external view
        returns (YieldTokenParams memory params);

    /// @notice Gets current limit, maximum, and rate of the minting limiter.
    ///
    /// @return currentLimit The current amount of debt tokens that can be minted.
    /// @return rate         The maximum possible amount of tokens that can be liquidated at a time.
    /// @return maximum      The highest possible maximum amount of debt tokens that can be minted at a time.
    function getMintLimitInfo()
        external view
        returns (
            uint256 currentLimit,
            uint256 rate,
            uint256 maximum
        );

    /// @notice Gets current limit, maximum, and rate of a repay limiter for `underlyingToken`.
    ///
    /// @param underlyingToken The address of the underlying token.
    ///
    /// @return currentLimit The current amount of underlying tokens that can be repaid.
    /// @return rate         The rate at which the the current limit increases back to its maximum in tokens per block.
    /// @return maximum      The maximum possible amount of tokens that can be repaid at a time.
    function getRepayLimitInfo(address underlyingToken)
        external view
        returns (
            uint256 currentLimit,
            uint256 rate,
            uint256 maximum
        );

    /// @notice Gets current limit, maximum, and rate of the liquidation limiter for `underlyingToken`.
    ///
    /// @param underlyingToken The address of the underlying token.
    ///
    /// @return currentLimit The current amount of underlying tokens that can be liquidated.
    /// @return rate         The rate at which the function increases back to its maximum limit (tokens / block).
    /// @return maximum      The highest possible maximum amount of debt tokens that can be liquidated at a time.
    function getLiquidationLimitInfo(address underlyingToken)
        external view
        returns (
            uint256 currentLimit,
            uint256 rate,
            uint256 maximum
        );
}

pragma solidity >=0.5.0;

/// @title  IERC20Minimal
/// @author Alchemix Finance
interface IERC20Minimal {
    /// @notice An event which is emitted when tokens are transferred between two parties.
    ///
    /// @param owner     The owner of the tokens from which the tokens were transferred.
    /// @param recipient The recipient of the tokens to which the tokens were transferred.
    /// @param amount    The amount of tokens which were transferred.
    event Transfer(address indexed owner, address indexed recipient, uint256 amount);

    /// @notice An event which is emitted when an approval is made.
    ///
    /// @param owner   The address which made the approval.
    /// @param spender The address which is allowed to transfer tokens on behalf of `owner`.
    /// @param amount  The amount of tokens that `spender` is allowed to transfer.
    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /// @notice Gets the current total supply of tokens.
    ///
    /// @return The total supply.
    function totalSupply() external view returns (uint256);

    /// @notice Gets the balance of tokens that an account holds.
    ///
    /// @param account The account address.
    ///
    /// @return The balance of the account.
    function balanceOf(address account) external view returns (uint256);

    /// @notice Gets the allowance that an owner has allotted for a spender.
    ///
    /// @param owner   The owner address.
    /// @param spender The spender address.
    ///
    /// @return The number of tokens that `spender` is allowed to transfer on behalf of `owner`.
    function allowance(address owner, address spender) external view returns (uint256);

    /// @notice Transfers `amount` tokens from `msg.sender` to `recipient`.
    ///
    /// @notice Emits a {Transfer} event.
    ///
    /// @param recipient The address which will receive the tokens.
    /// @param amount    The amount of tokens to transfer.
    ///
    /// @return If the transfer was successful.
    function transfer(address recipient, uint256 amount) external returns (bool);

    /// @notice Approves `spender` to transfer `amount` tokens on behalf of `msg.sender`.
    ///
    /// @notice Emits a {Approval} event.
    ///
    /// @param spender The address which is allowed to transfer tokens on behalf of `msg.sender`.
    /// @param amount  The amount of tokens that `spender` is allowed to transfer.
    ///
    /// @return If the approval was successful.
    function approve(address spender, uint256 amount) external returns (bool);

    /// @notice Transfers `amount` tokens from `owner` to `recipient` using an approval that `owner` gave to `msg.sender`.
    ///
    /// @notice Emits a {Approval} event.
    /// @notice Emits a {Transfer} event.
    ///
    /// @param owner     The address to transfer tokens from.
    /// @param recipient The address that will receive the tokens.
    /// @param amount    The amount of tokens to transfer.
    ///
    /// @return If the transfer was successful.
    function transferFrom(address owner, address recipient, uint256 amount) external returns (bool);
}

pragma solidity >=0.5.0;

/// @title  IERC20Metadata
/// @author Alchemix Finance
interface IERC20Metadata {
    /// @notice Gets the name of the token.
    ///
    /// @return The name.
    function name() external view returns (string memory);

    /// @notice Gets the symbol of the token.
    ///
    /// @return The symbol.
    function symbol() external view returns (string memory);

    /// @notice Gets the number of decimals that the token has.
    ///
    /// @return The number of decimals.
    function decimals() external view returns (uint8);
}

pragma solidity ^0.8.11;

/// @title  Sets
/// @author Alchemix Finance
library Sets {
    using Sets for AddressSet;

    /// @notice A data structure holding an array of values with an index mapping for O(1) lookup.
    struct AddressSet {
        address[] values;
        mapping(address => uint256) indexes;
    }

    /// @dev Add a value to a Set
    ///
    /// @param self  The Set.
    /// @param value The value to add.
    ///
    /// @return Whether the operation was successful (unsuccessful if the value is already contained in the Set)
    function add(AddressSet storage self, address value) internal returns (bool) {
        if (self.contains(value)) {
            return false;
        }
        self.values.push(value);
        self.indexes[value] = self.values.length;
        return true;
    }

    /// @dev Remove a value from a Set
    ///
    /// @param self  The Set.
    /// @param value The value to remove.
    ///
    /// @return Whether the operation was successful (unsuccessful if the value was not contained in the Set)
    function remove(AddressSet storage self, address value) internal returns (bool) {
        uint256 index = self.indexes[value];
        if (index == 0) {
            return false;
        }

        // Normalize the index since we know that the element is in the set.
        index--;

        uint256 lastIndex = self.values.length - 1;

        if (index != lastIndex) {
            address lastValue = self.values[lastIndex];
            self.values[index] = lastValue;
            self.indexes[lastValue] = index + 1;
        }

        self.values.pop();

        delete self.indexes[value];

        return true;
    }

    /// @dev Returns true if the value exists in the Set
    ///
    /// @param self  The Set.
    /// @param value The value to check.
    ///
    /// @return True if the value is contained in the Set, False if it is not.
    function contains(AddressSet storage self, address value) internal view returns (bool) {
        return self.indexes[value] != 0;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"weth","type":"address"},{"internalType":"address","name":"_whitelist","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"IllegalArgument","type":"error"},{"inputs":[],"name":"IllegalState","type":"error"},{"inputs":[],"name":"Unauthorized","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"WETH","outputs":[{"internalType":"contract IWETH9","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"alchemist","type":"address"},{"internalType":"address","name":"yieldToken","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"minimumAmountOut","type":"uint256"}],"name":"depositUnderlying","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"alchemist","type":"address"}],"name":"refreshAllowance","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"version","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"whitelist","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"alchemist","type":"address"},{"internalType":"address","name":"yieldToken","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"minimumAmountOut","type":"uint256"}],"name":"withdrawUnderlying","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc20000000000000000000000003f950f06064a43d42a8e7c199bb77b8e3a4b2096

-----Decoded View---------------
Arg [0] : weth (address): 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2
Arg [1] : _whitelist (address): 0x3f950f06064A43d42a8e7C199BB77b8E3A4b2096

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000c02aaa39b223fe8d0a0e5c4f27ead9083c756cc2
Arg [1] : 0000000000000000000000003f950f06064a43d42a8e7c199bb77b8e3a4b2096